Previous
Previous Product Image

Tube Art - Lemon Yellow

5,90 €
Next

Tube Art - Bleu de France

5,90 €
Next Product Image

Description

Characteristics Density: Extra fluid Intensity: Extra pigmented Residue: No residue Shade: Turquoise blue Usage and compatibility Tube Arts are designed for nail art requiring ultimate finesse and precision. Thanks to their highly pigmented formula, they offer immediate opacity, allowing you to work quickly while achieving a sharp, uniform finish. These gels, which are tack-free after curing, are perfectly suited for techniques such as Babycolor, Stamping, One Stroke, and fine line work. They can also be mixed with other shades or formulas to create unique, custom nuances. Do not apply on top of a finish/top coat. ⚠ Please note that for some tubes, the product may take a moment to flow; this is due to an air bubble at the base of the product. For others, the product flows immediately, as the air bubble is located higher in the tube and will be eliminated during use. All full tubes weigh approximately 11g and contain the same amount of product (6ml). Contains TPO, non-cosmetic product. When using, it is essential to follow safety protocols: the use of gloves, safety glasses, and a mask is recommended, along with proper room ventilation to prevent inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base layer and must be sealed with a top coat. Consult the "Protocol" tab for more details.
Protocol:
Using Tube Art
Babyboomer and Babycolor
-Place a drop of Tube Art on a palette.
-Dab a BabySponge or the SpongeBrush into the drop to create a gradient.
-Apply to a smooth surface (finely buffered or over a matte top coat).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Seal with a top coat.
-
Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper over the design without applying pressure.
-Flash-cure the design on the stamper with the Mini UV/LED Lamp (3 seconds max).
-Transfer onto a smooth surface (buffered or over a matte top coat).
-Final cure for 60 seconds.
-Seal with a top coat.
-
Usage Tips: As these gels are ultra-pigmented, they should be applied very thinly during Nail Art to ensure proper curing. We do not recommend using them for French tips or full-color coverage if used pure. These gels should never be wiped with cleanser; because they are so thin, you would remove the product entirely. When adding them to other formulas, use only a very small amount to ensure optimal curing and long-lasting wear.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and strictly follow all instructions. Keep out of reach of children. Causes skin irritation and severe eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYE PROTECTION. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a physician.

If needed, contact our after-sales service via email: contact@pinkbeauty.lu or via the contact form on our website.
Utilisation du Tube Art
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-
Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led (3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.     

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.