Previous
Previous Product Image

Tube Art - Jade Green

5,90 €
Next

Tube Art - Pastel Yellow

5,90 €
Next Product Image

Tube Art - Granny Smith Green

5,90 €

Description

Characteristics

Density: Extra fluid

Intensity: Extra pigmented

Residue: Tack-free

Shade: Granny Smith Apple Green

Usage and Compatibility
Tube Art gels are specifically designed for nail art requiring extreme precision and high intensity. Their highly pigmented formula provides immediate opacity, reducing application time and enhancing the sharpness of your designs.
These tack-free gels are perfect for techniques such as Babycolor, Stamping, One Stroke, and fine line work. They can also be blended with other colors or formulas to create unique, custom shades for every creation.
Do not apply over a top coat.
⚠ Please be aware that in some tubes, the product may take a moment to flow due to an air bubble at the base. In others, it flows immediately if the air bubble is located higher up; this will be eliminated during normal use. All full tubes weigh approximately 11g and contain the same amount of product (6ml).
Contains TPO; non-cosmetic product. During use, it is essential to follow safety protocols: wearing gloves, goggles, and a mask is recommended, along with ensuring proper room ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it should only be used over a base layer and must be sealed with a top coat.
Check the "Protocol" tab for further details.
Protocol:
Using Tube Art
Babyboomer and Babycolor
-Place a drop of Tube Art onto a palette.
-Dab a BabySponge or the SpongeBrush into the drop to create a gradient.
-Apply to a smooth surface (finely buffed or over a matte top coat).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Seal with a top coat.
-
Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper over the design without applying pressure.
-Flash cure the design on the stamper using the Mini UV/LED Lamp (3 seconds max).
-Transfer to a smooth surface (buffed or over a matte top coat).
-Final cure for 60 seconds.
-Seal with a top coat.
-
Usage Tips: As these gels are ultra-pigmented, do not apply them thickly during Nail Art, as they may not cure properly. We advise against using them for French tips or full-color coverage if used pure. These gels should never be wiped with cleanser; because they are applied so thinly, you would remove the entire design. When adding to other formulas, use only a very small amount to ensure optimal curing and long-lasting wear.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and strictly follow all instructions. Keep out of reach of children. Causes skin irritation and severe eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYEWEAR. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a physician.

If necessary, contact our after-sales service via email: contact@pinkbeauty.lu or via our website contact form.
Utilisation du Tube Art
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-
Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led (3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.   

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.