Previous
Previous Product Image

Tube Art - Frog Green

5,90 €
Next

Tube Art - Granny Smith Green

5,90 €
Next Product Image

Tube Art - Jade Green

5,90 €

Description

Features Density: Extra fluid Intensity: Highly pigmented Residue: No-wipe Shade: Jade Green Usage and Compatibility Tube Arts are specifically designed for nail art requiring both precision and intensity. Their ultra-pigmented formula ensures immediate coverage, making it easy to create complex patterns while optimizing your workflow. These no-wipe gels are perfect for techniques such as Babycolor, Stamping, One Stroke, and fine linework. They can also be blended with other colors or formulas to create bespoke shades. Do not apply on top of a finish coat. ⚠ Please be advised that for certain tubes, the product may take a moment to flow; this is due to an air bubble at the base of the product. For others, the product flows immediately, meaning the air bubble is located higher in the tube and will be eliminated during use. All full tubes weigh approximately 11g and contain the same amount of product (6ml). Contains TPO, non-cosmetic product. During use, it is essential to follow safety protocols: wearing gloves, goggles, and a mask is recommended, along with ensuring proper room ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base layer and must be covered with a top coat. See the "Protocol" tab for more details.
Protocol:
Using Tube Art
Babyboomer and Babycolor
-Place a drop of Tube Art on a palette.
-Dab a BabySponge or SpongeBrush into the drop to create a gradient.
-Apply to a smooth surface (finely buffed or with a matte finish).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Cover with a top coat.
-
Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper without applying pressure.
-Flash cure the design on the stamper with the Mini UV Led Lamp (3 seconds max).
-Transfer to a smooth surface (buffed or with a matte finish).
-Final cure for 60 seconds.
-Cover with a top coat.
-
Usage Tips: As these gels are ultra-pigmented, do not apply with any thickness during Nail Art, or they may not cure properly. We do not recommend using them for French tips or full-color application if used pure. These gels must never be wiped with cleanser; because they are so fine, you would remove the entire product. When adding to other formulas, ensure you use only a very small amount to ensure optimal curing and long-lasting results.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and follow all instructions strictly. Keep out of reach of children. Causes skin irritation and severe eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYEWEAR. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a physician.

If needed, contact our after-sales service via email: contact@pinkbeauty.lu or via the contact form on our website.
Utilisation du Tube Art
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-
Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led (3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.     

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.