Previous
Previous Product Image

Tube Art - Summer Fuchsia

5,90 €
Next

Tube Art - Summer Yellow

5,90 €
Next Product Image

Tube Art - Summer Sepia

5,90 €

Description

Product Features

Density: Extra fluid
Intensity: Extra pigmented
Residue: No-wipe / Residue-free
Shade: Summer Sepia

Usage and Compatibility
Tube Arts are engineered for nail designs that demand absolute precision and high intensity. Their high pigment concentration ensures instant opacity, streamlining your workflow and elevating your design results.
These residue-free gels are perfect for techniques such as Babycolor, Stamping, One Stroke, and fine line work. They can also be mixed with other colors or formulas to create unique, custom shades.
Do not apply on top of a finish/top coat.
⚠ Please note that for some tubes, the product may take a moment to flow due to an air bubble at the base. For others, it may flow immediately if the air bubble is higher in the tube; this will even out during use. All full tubes weigh approximately 11g and contain the same amount of product (6ml).
Contains TPO, non-cosmetic product. During use, it is vital to adhere to safety protocols: wearing gloves, safety goggles, and a mask is recommended, along with ensuring proper room ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base coat and must be sealed with a top coat.
Check the "Protocol" tab for more details.
Protocol:
Using Tube Art
Babyboomer and Babycolor
-Place a drop of Tube Art on a palette.
-Dab a BabySponge or the SpongeBrush onto the drop to create a gradient.
-Apply to a smooth surface (finely buffed or with a matte finish).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Seal with a top coat.
-Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper without applying pressure.
-Flash-cure the design on the stamper with the Mini UV/LED Lamp (3 seconds max).
-Transfer to a smooth surface (buffed or with a matte finish).
-Final cure for 60 seconds.
-Seal with a top coat.
-

Usage Advice: Since these gels are ultra-pigmented, avoid applying in thick layers during Nail Art to ensure proper curing. We do not recommend using them for French manicures or full-color application if used pure. These gels should never be wiped with cleanser (degreased); because they are applied so thinly, you would remove the product entirely. When mixing into other formulas, add only a very small amount to ensure optimal curing and long-lasting wear.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and follow all instructions strictly. Keep out of reach of children. Causes skin irritation and serious eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYEWEAR. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a physician.

If needed, contact our after-sales service via email at: contact@pinkbeauty.lu or via the contact form on our website.
Utilisation du Tube Art     
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led(3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.       

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.