Previous
Previous Product Image

Tube Art - Raspberry Pink

5,90 €
Next

Tube Art - Frog Green

5,90 €
Next Product Image

Tube Art - Carmine Rose

5,90 €

Description

Features

Density: Extra fluid
Intensity: Highly pigmented
Residue: No residue (Non-wipe)
Shade: Carmine Rose

Usage and Compatibility
Tube Art gels are designed for nail art requiring precision and high intensity. Their pigment-concentrated formula provides immediate opacity, reducing working time and enhancing the detail of your designs.
These non-wipe gels (no residue after curing) are perfect for techniques such as Babycolor, Stamping, One Stroke, and fine line work. They can also be mixed with other shades or formulas for custom creations.
Do not apply over a top coat.

⚠ Please note that for some tubes, the product may take a moment to flow due to an air bubble at the base of the tube. For others, it may flow immediately if the bubble is located higher; this will naturally resolve during use. All full tubes weigh approximately 11g and contain the same amount of product (6ml).
Contains TPO, non-cosmetic product. When using, it is essential to follow safety rules: wearing gloves, goggles, and a mask is recommended, along with ensuring good room ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base layer and must be covered with a top coat.
Check the "Protocol" tab for more details.
Protocol:
Using Tube Art
Baby Boomer and Babycolor
- Place a drop of Tube Art on a palette.
- Dab a BabySponge or SpongeBrush into the drop to create a gradient.
- Apply onto a smooth surface (finely buffered or with a matte top coat).
- Cure for 30 seconds under a UV/LED lamp.
- Adjust intensity by repeating the step if necessary.
- Final cure for 60 seconds.
- Apply a top coat.
-
Stamping Gel
- Clean the stamping plate and stamper.
- Apply a line of product to the edge of the design.
- Scrape once or twice without changing direction.
- Roll the stamper without applying pressure.
- Flash-cure the design on the stamper using the Mini UV/LED Lamp (max 3 seconds).
- Transfer to a smooth surface (buffered or with a matte top coat).
- Final cure for 60 seconds.
- Apply a top coat.
-
Usage Tips: As these gels are ultra-pigmented, do not apply them too thickly or they may not cure properly. We do not recommend using them for French tips or full-color coverage if used pure. These gels should never be wiped (cleansed) as they are very thin and the product would be removed. When adding to other formulas, use only a very small amount to ensure optimal curing and long-lasting wear.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and follow all instructions. Keep out of reach of children. Causes skin irritation and severe eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYE PROTECTION. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a doctor.

If needed, contact our after-sales service via email: contact@pinkbeauty.lu or via the contact form on our website.
Utilisation du Tube Art
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-
Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led (3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale. 

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.