Previous
Previous Product Image

Tube Art - Turquoise Blue

5,90 €
Next

Tube Art - Turquoise Blue

5,90 €
Next Product Image

Description

Characteristics

Density: Extra fluid

Intensity: Highly pigmented

Residue: Residue-free (No-wipe)

Shade: Bleu de France (French Blue)

Usage and Compatibility
Tube Arts are designed for nail art requiring ultimate precision and intensity. Their high pigment concentration delivers maximum opacity from the very first application, significantly streamlining your workflow.
These no-wipe gels are perfect for advanced techniques such as Babycolor, Stamping, One Stroke, and fine line work. They can also be mixed with other shades or formulas to create bespoke, custom colors.
Do not apply on top of a finishing coat.
⚠ Please note that for some tubes, the product may take a moment to flow due to an air bubble at the base. In others, the product flows immediately as the air bubble is located higher in the tube and will be eliminated during use. All full tubes weigh approximately 11g and contain 6ml of product.
Contains TPO, non-cosmetic product. When using, it is essential to follow safety protocols: wearing gloves, eye protection, and a mask is recommended, along with ensuring proper ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base layer and must be covered with a top coat.
Consult the "Protocol" tab for more details.
Protocol:
Using Tube Art
Babyboomer and Babycolor
-Place a drop of Tube Art on a palette.
-Dab a BabySponge or the SpongeBrush onto the drop to create a perfect gradient.
-Apply to a smooth surface (finely buffed or over a matte finish).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Seal with a top coat.
-
Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice in a single direction.
-Roll the stamper over the design without applying pressure.
-Flash cure the design on the stamper with the Mini UV/LED Lamp (3 seconds max).
-Transfer to a smooth surface (buffed or over a matte finish).
-Final cure for 60 seconds.
-Seal with a top coat.
-
Usage Tips: Since these gels are ultra-pigmented, do not apply them thickly, as this may prevent proper curing. We advise against using them for full-color coverage or French tips if used pure. These gels should never be wiped with cleanser, as they are applied very thinly and the product would be removed. When mixing into other formulas, use only a very small amount to ensure optimal curing and long-lasting wear.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read and follow all instructions carefully. Keep out of reach of children. Causes skin irritation and serious eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYE PROTECTION. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a doctor.

If needed, contact our after-sales service via email: contact@pinkbeauty.lu or via the contact form on our website.
Utilisation du Tube Art
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-
Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led (3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.   

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.