Easy Foil

Applying Easy Foil
-Prepare a colored base that has been degreased and lightly buffed with a Buffer Block, ideally in a shade similar to the foil.
-Apply Easy Foil to the areas intended for the transfer.
-Cure for 60 to 120 seconds under LED/UV or 2 minutes under UV, then allow to cool slightly.
-Cut pieces of foil and apply the matte (non-shiny) side to the nail, pressing firmly.
-Rub thoroughly, then gradually remove the foil. If necessary, repeat the application.
-Lightly file the edges with a soft-grit file to remove any excess foil.
-Apply a first layer of top coat, cure for 30 seconds, then add a second layer and cure for 60 to 120 seconds.
-Usage Tips
Full-cover designs can be difficult to maintain on soft or flexible nails, which may affect the foil's longevity. To ensure an optimal finish, it is best to use a builder gel or a matching colored base to hide any potential imperfections.
For better durability, it is recommended to apply two layers of top coat. For clients with high-impact lifestyles or manual jobs, adding a Rubber Base as the first top coat layer before the final finish significantly improves hold.