Previous
Previous Product Image

Tube Art - Blood Orange

5,90 €
Next

Tube Art - Irish Green

5,90 €
Next Product Image

Tube Art - Dusty Rose

5,90 €

Description

Characteristics Density: Extra fluid Intensity: Extra pigmented Residue: Residue-free Shade: Dusty Rose Usage and Compatibility Tube Arts are specially designed for nail art requiring precision and high color intensity. Their high pigmentation ensures immediate opacity, allowing for fast work and a clean finish. These residue-free gels after curing are perfectly suited for techniques like Babycolor, Stamping, One Stroke, and fine lines. They can also be mixed with other colors or formulas to create custom shades tailored to each creation. Do not apply on top of a top coat. ⚠ Please note that for some tubes, the product may take some time to flow; this is due to the presence of an air bubble at the base of the product. For others, the product flows directly, as the air bubble is located higher in the tube and will be eliminated during use. All full tubes weigh approximately 11g and contain the same amount of product, 6ml. Contains TPO, non-cosmetic product. When using, it is important to follow safety rules: wearing gloves, glasses, and a mask is recommended, as well as good ventilation of the room to avoid inhalation. This product must not be applied directly to the natural nail, but only on a base layer, and must be covered by a top coat. Consult the "Protocol" tab for more details.
Protocol:
Using Tube Art
Babyboomer and Babycolor
-Place a drop of Tube Art on a palette.
-Tap a BabySponge or SpongeBrush on the drop to create a gradient.
-Apply to a smooth surface (finely buffed or with a matte finish).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure of 60 seconds.
-Cover with a top coat.
-
Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper without pressing.
-Flash-cure the design on the stamper with the Mini UV Led Lamp (3 seconds max).
-Transfer to a smooth surface (buffed or with a matte finish).
-Final cure of 60 seconds.
-Cover with a top coat.
-
Usage Tips: As these gels are ultra-pigmented, no thickness should be applied during Nail Art, otherwise they may not cure correctly. We therefore advise against using them for French tips or full color if used pure. These gels must never be wiped with cleanser, as they are very thin and you would remove all the product. When adding to other formulas, ensure you only add a very small amount for optimal curing and long-lasting results.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and strictly follow all instructions. Keep out of reach of children. Causes skin irritation and severe eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYE PROTECTION. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a doctor.

If needed, contact our after-sales service via email: contact@pinkbeauty.lu or via our contact form on the website.
Utilisation du Tube Art
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-
Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led (3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.