Previous
Previous Product Image

Tube Art - Neon Green

5,90 €
Next

Tube Art - Blood Orange

5,90 €
Next Product Image

Description

Features Density: Extra fluid Intensity: Ultra-pigmented Residue: No-wipe Shade: Neon Pink Usage and Compatibility Tube Art Neon Pink is specifically engineered for designs that demand extreme precision and high-impact color. Its ultra-pigmented formula delivers instant opacity, saving you valuable professional time. This no-wipe gel is ideal after curing for advanced techniques such as Babycolor, Stamping, One Stroke, and intricate fine-line art. It can also be blended with other shades or formulas to create custom colors. For unique creative effects, you can mix in pigments or glitter, or create "sugar effects" prior to curing. Do not apply directly over a top coat. ⚠ Please note that for some tubes, the product may take a moment to flow due to an air bubble at the base. In others, it flows immediately as the bubble is located higher in the tube and will be eliminated during use. All full tubes weigh approximately 11g and contain the same amount of product: 6ml. Non-cosmetic product. Professional safety standards must be followed during use: wearing gloves, goggles, and a mask is recommended, along with proper room ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it must be applied over a base layer and sealed with a top coat. Consult the "Protocol" tab for further details.
Protocol:
Using Tube Art         
Babyboomer and Babycolor
-Place a drop of Tube Art on a palette.
-Dab a BabySponge or SpongeBrush onto the drop to create a smooth gradient.
-Apply to a smooth surface (finely buffed or over a matte top coat).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Apply a top coat finish.
-Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper without applying pressure.
-Flash-cure the design on the stamper using a Mini UV LED Lamp (3 seconds max).
-Transfer onto a smooth surface (buffed or with a matte top coat).
-Final cure for 60 seconds.
-Apply a top coat finish. 
-
Usage Tips: Because these gels are ultra-pigmented, they must be applied in extremely thin layers for Nail Art to ensure proper curing. We advise against using them for French tips or full-color application if used pure. These gels should never be wiped (cleansed), as their thin consistency means the product would be entirely removed. When adding to other formulas, use sparingly to ensure optimal curing and long-lasting results.
STYRENE/ACRYLATES COPOLYMER/POLYURETHANE, HEMA, BIS-TRIMETHYLBENZOYL PHENYLPHOSPHINE OXIDE, HYDROXYCYCLOHEXYL PHENYL KETONE, (+/- : CI 14700, CI 61565, CI 77891, CI 77742, CI 77007, CI 77000).
Cette liste d'ingrédients peut faire l'objet de modifications, veuillez consulter l'emballage du produit acheté.
Avertissements : Réservé à un usage professionnel. Lire attentivement le mode d’emploi. Peut provoquer une réaction allergique. Éviter tout contact avec la peau et les yeux. Peut être irritant pour les yeux et la peau. En cas de contact avec les yeux, rincez abondamment à l’eau. Arrêter l’utilisation en cas d’irritation. Ne pas ingérer. Ne pas inhaler. Tenir à l’écart des substances inflammables. Le port d’un masque, de gants et de lunettes est recommandé. Tenir hors de la portée des enfants et des animaux.

En cas de besoin, contactez notre service après vente via l'email de contact : contact@pinkbeauty.lu ou via notre formulaire contact du site.  
Utilisation du Tube Art         
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led(3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition matte).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.  

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.