Description
Caractéristiques
Densité : Extra fluid
Intensité : Extra pigmented
Residue : No residue
Shade : Fauve
Usage and Compatibility
Tube Arts are specifically formulated for nail art requiring high precision. Their intense pigmentation ensures perfect opacity from the first layer, streamlining your creative workflow.
Once cured, these no-wipe gels are perfect for techniques such as Baby Color, Stamping, One Stroke, and fine line work. They can also be mixed with other shades or formulas to expand your creative possibilities.
Do not apply over a top coat.
⚠ Please be aware that for some tubes, the product may take a moment to flow due to an air bubble at the base. For others, the product flows immediately; the air bubble is simply located higher in the tube and will dissipate during use. All full tubes weigh approximately 11g and contain the same amount of product (6ml).
Contains TPO; non-cosmetic product. During use, it is essential to follow safety regulations: wearing gloves, goggles, and a mask is recommended, as well as ensuring good room ventilation or extraction to avoid inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base layer and must be covered with a top coat.
Check the "Protocol" tab for more details.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and follow all instructions strictly. Keep out of reach of children. Causes skin irritation and serious eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYEWEAR. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a physician.
If needed, contact our after-sales service at contact@pinkbeauty.lu or via our website contact form.
Tube Art Application
Baby Boomer and Baby Color
-Apply a drop of Tube Art onto a palette.
-Dab a BabySponge or SpongeBrush into the drop to achieve a seamless blend.
-Apply to a smooth surface (finely buffed or with a matte top coat).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Apply a top coat.
-Stamping Gel
-Clean the stamping plate and stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper without pressing.
-Flash cure the design on the stamper with the Mini UV/LED Lamp (3 seconds max).
-Transfer onto a smooth surface (buffed or with a matte top coat).
-Final cure for 60 seconds.
-Apply a top coat.
-
Usage Tips: These gels are ultra-pigmented; avoid any thickness during Nail Art application, or they may not cure properly. We advise against using them for French tips or full-color application if used pure. These gels should never be cleansed/wiped, as they are very thin and the product would be removed. When adding to other formulas, ensure you use only a very small amount to ensure optimal curing and wear.
