Previous
Previous Product Image

Tube Art - Pastel Mauve

5,90 €
Next

Tube Art - Pastel Green

5,90 €
Next Product Image

Tube Art - Pastel Coral

5,90 €

Description

Characteristics

Density: Extra fluid

Intensity: Ultra-pigmented

Residue: No residue (Tack-free)

Shade: Pastel Coral

Usage and Compatibility
Tube Arts are specifically formulated for nail art requiring extreme precision and intensity. Their high pigment concentration ensures immediate opacity, facilitating the creation of intricate designs and optimizing your workflow.
These tack-free gels are perfect for techniques such as Babycolor, Stamping, One Stroke, and fine linework. They can also be mixed with other shades or formulas to create custom colors.
Do not apply on top of a finish/top coat.
⚠ Please note that for some tubes, the product may take a moment to flow due to an air bubble at the base. In others, the product flows immediately because the air bubble is higher in the tube and will dissipate during use. All full tubes weigh approximately 11g and contain the same 6ml volume of product.
Contains TPO; non-cosmetic product. During use, it is essential to follow safety protocols: wearing gloves, goggles, and a mask is recommended, along with ensuring proper room ventilation to avoid inhalation. This product must not be applied directly to the natural nail; it should only be applied over a base layer and must be sealed with a top coat.
Consult the "Protocol" tab for more details.
Protocol:
Using Tube Art

Babyboomer and Babycolor

-Place a drop of Tube Art on a palette.

-Dab a BabySponge or SpongeBrush onto the drop to achieve a gradient.

-Apply to a smooth surface (finely buffered or over a matte top coat).

-Cure for 30 seconds under a UV/LED lamp.

-Adjust intensity by repeating the steps if necessary.

-Final cure for 60 seconds.

-Seal with a top coat.

Stamping Gel

-Clean the stamping plate and the stamper.

-Apply a line of product to the edge of the design.

-Scrape once or twice without changing direction.

-Roll the stamper without applying pressure.

-Flash-cure the design on the stamper with the Mini UV/LED Lamp (3 seconds max).

-Transfer to a smooth surface (buffered or over a matte top coat).

-Final cure for 60 seconds.

-Seal with a top coat.

-

Usage Tips: As these gels are ultra-pigmented, they must be applied very thinly during Nail Art to ensure proper curing. We advise against using them for French tips or full-color coverage if used pure. These gels should never be wiped (cleansed), as they are so fine that the product would be removed. When adding them to other formulas, use only a minimal amount to ensure optimal curing and long-lasting results.
ACRYLATES COPOLYMER, 4-HYDROXYBUTYL ACRYLATE, ACRYLOYL MORPHOLINE, HEMA, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, PEG-12 DIMETHICONE, [+/- :CI 12490, CI 60725, CI 11680].
Warnings: NON-COSMETIC PRODUCT, for professional use only. Read carefully and follow all instructions. Keep out of reach of children. Causes skin irritation and severe eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. Wear protective GLOVES & EYE PROTECTION. In case of contact with skin or eyes: rinse thoroughly with water. If symptoms persist, consult a physician.

If needed, contact our after-sales service via email: contact@pinkbeauty.lu or through our website contact form.
Utilisation du Tube Art       
Babyboomer et Babycolor
-Déposez une goutte de Tube Art sur une palette.
-Tapotez une BabySponge ou le SpongeBrush sur la goutte pour obtenir un fondu.
-Appliquez sur une surface lisse (finement buffée ou avec une finition matte).
-Polymérisez 30 secondes sous lampe UV/LED.
-Ajustez l’intensité en répétant l’étape si nécessaire.
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition.
-Stamping Gel
-Nettoyez la plaque de stamping et le tampon.
-Appliquez une ligne de produit sur l’extrémité du motif.
-Raclez une ou deux fois sans changer de direction.
-Roulez le tampon sans presser.
-Flashez le motif sur le tampon avec la Mini Lampe UV Led(3 secondes max).
-Transférez sur une surface lisse (buffée ou avec finition mate).
-Polymérisation finale de 60 secondes.
-Recouvrez d’une finition. 
-
Conseils d'utilisation : Ces gels étant ultra pigmentés, aucune épaisseur ne doit être réalisée lors des Nail Arts sous peine de ne pas polymériser correctement. Nous déconseillons donc son usage en French ou en couleur pleine s'ils sont utilisés purs. Ces gels ne doivent jamais être dégraissés, car très fins, vous retireriez tout le produit. Lors d'ajout dans des formules, veiller à n'en mettre que très peu, pour une polymérisation et une tenue optimale.       

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
⏳

Produit en réapprovisionnement

Cet article est actuellement en réapprovisionnement. Délai estimé : 1 à 2 semaines.
Votre commande sera expédiée dès réception du stock.