Tube Art - White - 6 ml

Using Tube Art
Babyboomer and Babycolor
-Dispense a drop of Tube Art onto a palette.
-Tap a BabySponge or the SpongeBrush onto the drop to create a gradient effect.
-Apply to a smooth surface (finely buffed or with a matte top coat).
-Cure for 30 seconds under a UV/LED lamp.
-Adjust the intensity by repeating the step if necessary.
-Final cure for 60 seconds.
-Seal with a top coat.
-
Stamping Gel
-Clean the stamping plate and the stamper.
-Apply a line of product to the edge of the design.
-Scrape once or twice without changing direction.
-Roll the stamper over the design without applying pressure.
-Flash cure the design on the stamper with the Mini UV LED Lamp (3 seconds max).
-Transfer to a smooth surface (buffed or with a matte finish).
-Final cure for 60 seconds.
-Seal with a top coat. 
-
Usage Tips: As these gels are ultra-pigmented, they must not be applied with any thickness during Nail Art, otherwise they may not cure correctly. We therefore advise against using them for French tips or full-color coverage if used pure. These gels must never be cleansed (wiped), as they are very thin and you would remove all the product. When adding them to other formulas, ensure you only use a very small amount to ensure optimal curing and long-lasting wear.