Rubber Base Fiber - Clear - 15 ml

Rubber Base Fiber Gel Application
As a base:
-Apply Nail Fresh, then gently rub the surface of the natural nail (already prepared).
-Apply the rubber base then cure under a 36W minimum LED/UV lamp for 60 seconds.
-Degrease the surface before applying color or top coat.
-As reinforcement/capping:
-Apply Nail Fresh, then rub the product onto the prepared nail without touching the cuticles.
-Place a small amount of gel at the apex and pull it towards the free edge.
-Use a liner brush for finishing touches if necessary. Tilt the nail to help distribution using gravity.
-Cure under an LED/UV lamp for 60 seconds. Degrease and file if necessary.
-With Soft Gel Tips (American capsules):
-Prepare the natural nail with Nail Fresh, without touching the cuticles.
-Apply a small amount of Rubber Base Fiber into the selected tip.
-Position the tip on the nail, press lightly to avoid air bubbles, flash cure under a mini lamp for 5 to 10 seconds.
-Finally, cure for 60 seconds under an LED/UV lamp.
-
Rubber Base Fiber Gel Removal
Soaking:
-File any non-soak off material applied over the base.
-Immerse nails in a soak-off liquid for 10 minutes or use foil wraps.
-Remove residues with an orange wood stick, then finish with a file if needed.
-Nourish nails and skin with a hydrating oil.
-Filing:
-Gradually debulk the gel with a file or a suitable e-file bit (coarse to medium grit).
-Refine the product close to the natural nail with fine grit bits.
-Polish nails with the Xtra Shine file.
-Hydrate with a nourishing oil.
-
Nail Training
For in-depth learning, explore our online training courses at www.mnails.tv.